Accessories

BLX/SLX-XY Mount

The BLX-XY and SLX-XY laser mount/adjustment systems are for the BLX- and SLX/M series of lasers, respectively.  They are generally supplied in red or green to suit the laser output.  The mounts are supplied with a 40mm pipe clamp, or can be supplied with releasable magnetic clamps (or other types) on request.

40mm mounting bars

Mounting bars are generally used in pairs to mount from M24 roof or wall bolts in underground mines.  The VERTHANGER is normally 500mm long with an M24 nut welded in one end.  HORHANGER is normally 500mm in length with a scaffold clamp and clamping knob for attachment to the vertical bar.

These mounting bars are available in different lengths and configurations, keeping in mind that we manufacture them in batches and specials generally a commitment to a small batch.

FRAS StringMount/FRASAlign

The STRINGFRAS laser stringline mount and FRASAlign stringline mount systems take laser alignment in underground coal mining to a whole new level.  You should perhaps not be using non-FRAS 3D printed laser mounts in a hazardous environment due to the potential for static build-up.  ART provides a geometrically designed FRAS Approved stringline mount for its SLX series of lasers, with an optional FRASAlign optical beam steering system that allows minor adjustments of the laser alignment to cater for small deviations in stringline mounting.

SWITCHES

Switches for the SLX series of lasers and for the BB series of removable battery modules are user-replaceable parts given that you can remove them to replace batteries.  ART can provide replacement switches for the SLX lasers and BB battery systems.

Leather battery pouch

ART lasers often have removable battery modules to facilitate easy changeover within a hazardous zone.  Being able to carry the battery modules around hands-free is important, and these pouches also protect the battery modules if dropped.  Battery pouches are available for all Intrinsically Safe removable battery modules

PRISMS

ART manufactures both 90 degree and 110/70 degree prism systems for use in underground coal mining.  The prisms allow for the original laser beam to pass through with 50% of it being deflected either 90 or 110 degrees.  The prism mount is manufactured so that the deflected beam has a simple tilt adjustment to aim it along the deflected direction.  The mounts use the 40mm bars for mounting but may be provided with other mounting options such as releasable magnet systems.

Releasable magnets

These magnetic systems are very strong and can be adapted to the BLX/SLX laser mounting unit or prism assemblies.  The magnets include V-groove for stable attachment to round bar surfaces as well.

Laser carry bags

These laser carry bags are very strong, and highly visible with reflective tape attached.  They are great for transporting laser units around a mine, or for storing them on hooks.  Manufactured in Australia, tough and very versatile.

Batteries for Certified products

ART is able to supply batteries for Certified products in bulk quantities.  The IECEx Certified laser products are Certified with tested battery types.  Batteries available are D-cells, C-cells or AA-cells.

Laser safety signs

Laser safety signs are required in industrial areas where lasers are being used.  ART has manufactured a few signs using adhesive-backed film so you can attach them to whatever you like.  Contact us with your requirements.

Laser carry bags

These laser carry bags are very strong, and highly visible with reflective tape attached.  They are great for transporting laser units around a mine, or for storing them on hooks.  Manufactured in Australia, tough and very versatile.